20l - Q-san Surface Sanitiser

82037
$121.88 $0.00 ( / ) + GST

An effective dual chain Q.A.C. based sanitiser, ideal for hard surface sanitising in food and beverage processing plants. Is approved as a ‘No Rinse’ sanitiser when used up to a maximum concentration of 400ppm quat.

USED FOR
Dual Chain Quat Sanitiser

DIRECTIONS FOR USE
All surfaces should be cleaned and rinsed thoroughly of all soils prior to the sanitiser application. Can be applied via spraying, misting, soaking, flooding or foaming. 

APPLICATIONS: 
RESIDUAL applications:- 1:200 – ( 500ppm quat ) Once applied, it should be left on the surface for a minimum of 10 minutes before rinsing. 

RINSING:- Residual levels ( >400ppm ) should be thoroughly rinsed off all product contacting surfaces with potable water. ‘NO RINSE’ applications:- 1: 250 – ( 400ppm quat ) At this dilution, product does not need to be rinsed off as long as the surfaces are adequately drained before processing commences. 

FOOTBATH applications:- Dose the footbath at approx. 1: 250 ( 400ppm ). Due to the regular introduction of contaminants in the footbath, you may need to replenish the contents during the course of the day.

Safety Data Sheet

Brochure

Available in 5L / 20L

An effective dual chain Q.A.C. based sanitiser, ideal for hard surface sanitising in food and beverage processing plants. Is approved as a ‘No Rinse’ sanitiser when used up to a maximum concentration of 400ppm quat. USED FORDual Chain Quat Sanitiser DIRECTIONS FOR USEAll surfaces should be cleaned and rinsed thoroughly...
Description

An effective dual chain Q.A.C. based sanitiser, ideal for hard surface sanitising in food and beverage processing plants. Is approved as a ‘No Rinse’ sanitiser when used up to a maximum concentration of 400ppm quat.

USED FOR
Dual Chain Quat Sanitiser

DIRECTIONS FOR USE
All surfaces should be cleaned and rinsed thoroughly of all soils prior to the sanitiser application. Can be applied via spraying, misting, soaking, flooding or foaming. 

APPLICATIONS: 
RESIDUAL applications:- 1:200 – ( 500ppm quat ) Once applied, it should be left on the surface for a minimum of 10 minutes before rinsing. 

RINSING:- Residual levels ( >400ppm ) should be thoroughly rinsed off all product contacting surfaces with potable water. ‘NO RINSE’ applications:- 1: 250 – ( 400ppm quat ) At this dilution, product does not need to be rinsed off as long as the surfaces are adequately drained before processing commences. 

FOOTBATH applications:- Dose the footbath at approx. 1: 250 ( 400ppm ). Due to the regular introduction of contaminants in the footbath, you may need to replenish the contents during the course of the day.

Safety Data Sheet

Brochure

Available in 5L / 20L

Extra Product Information

Not sure if it fits?

Check our Hand Towel x Dispenser Chart & Toilet Paper x Dispenser Chart to avoid buying the incorrect product.

For dimensions please refer to each individual product.

Shipping & Returns

AUSTRALIA WIDE SHIPPING

All orders are processed within 2-3 business days for local areas. Orders are not shipped or delivered on weekends or holidays.

Shipping rates & delivery estimates: shipping charges for your order will be calculated and displayed at checkout. Delivery will depend on your location, we endeavour to dispatch all orders within 2-5 working days, you will be notified on dispatch.

FREE DELIVERY on orders over $100+gst to local metro Sunny Coast, Brisbane & Gold Coast (Check here valid postcodes). Simply select "Local Delivery - Free" at check out.

Note: We does not deliver to PO Box addresses.

Still have questions? Check out the FAQ page

20l - Q-san Surface Sanitiser

$121.88 $0.00 ( / )